FS2611 DDR5 UDIMM/CUDIMM Interposer for CA Only Analysis at 4800+ MT/s

FuturePlus Systems’ FS2611 DDR5 UDIMM Interposer for CA-only analysis is a DDR5 UDIMM/CUDIMM interposer with Address/Command/Control capture at 4800+ MT/s.

• Interposer Design – The FS2611 DDR5 UDIMM probe does not sacrifice a memory slot, so you can probe any UDIMM, even in a fully populated memory bus.
• All signals are probed passively.
• Complete and accurate State analysis up to and including 4800+ MT/s.
• Clock Divider: Reduces the clock frequency for the logic analyzer’s capabilities in the routing path to the logic analyzer.
• Compatible with all JEDEC DDR5 UDIMM/CUDIMM's. RDIMM requires the FS2600A or the FS2670A and SODIMM requires the FS2602.
  
• Quick and easy interposer connection between the DDR5 UDIMM memory bus connector and the U4164A-02G Keysight logic analyzer module.
• Lower Cost and higher signal fidelity with direct attach cables.
• Short DDR5 UDIMM probe etch length makes it more reliable in marginal systems.

Logic Analyzer Requirement

– (2) U4164A-02G logic analysis modules

• 1 module for CHA
• 1 module for CHB

Note: FuturePlus has carefully simulated and designed this DDR5 UDIMM probe to work in your system and it extends the DDR5 bus less than 1.0 inch. Other factors can have a significant effect on the performance of the whole DDR5 bus analysis system including the BIOS settings of the memory controller, the target motherboard and UDIMM design, and the specific UDIMM socket being probed. All users are given 30 days to qualify this DDR5 UDIMM interposer in their system.